2026 ALDURA 29412,65 L

2026

ALDURA

Nuevo

185BBL

NEW ALDURA 185BBL ALUMINUM VACUUM TRAILER NON-CODE Capacity: 7,770 gal. + 1% Expansion Commodity: Transportation of oilfield fluids such as water, mud, oil field waste. Pressure: Tested at 23 PSI Relief Settings: 22 IN HG External, 17 PSIG Internal Overall Length: 48 ft. Height: 10 ft. 9 in. Weight: 13,080 Lbs. Width: 102 in Material: Aluminum 5454H-32 Suspension: 2xHendirckson Intraax 30K and 1xMeritor MTA23T Baffles: Four (4) of 1/4 in. thk Bulkheads: 3/8" Aluminum 5454H Non-code ASME Shape Compartments: Single Overturn Protection: Three (3), at front, middle and back of tank Shell: 1/4" aluminum shell 5454H-32 Rings: Thirteen (13) rolled of 3"x2" C-channel profile Welding: Inside and out, minimal tie-ins with mig welding Connections: 3 in. vacuum female camlock fitting on middle top front bulkhead Outlet: One (1) 6 in. TTMA flange. Shut Off: Ball type primary in front manway and ball type secondary 12 Gal. on driver's side front with drain Venting/Reliefs: 1-1/2 in. vacuum relief, 2 in. pressure relief, both located at the top front of barrel, 2 in. blow down line at rear Axles: Three (3) 2x Hendrickson 30,000lbs each 1x lift front axle 23,000 lbs. 120 in. wide, 71.5 in. track MTA23T. Ferrous hub, cast drum, ABS. Brakes: Air brakes with two boosters FMVSS-121, ABS 4S/2M module anti-lock brake system Bumper: 3 in. X 6 in. tube per DOT Sub-frame: High Strenght Steel painted in aluminum color Landing Gear: 2 speed JOST Heavy Duty Tires: Twelve (12) 11 X 24.5 R, Cut and chip Wheels: Twelve (12) All-Aluminum 24.5" Upper Coupler: Bolt on adjustable 3/8" steel plate Access Ladder: One (1) safety driver side access ladder with handrails Manways: Three (3) on top of the tank, and one (1) on the rear bulkhead. All of 20 in. aluminum domed style with plates swing bolts and wing nuts Walkway: Driver side, with handrails, middle ladder, toe kicks, thru tread anti-slip walkway from the front to the top rear manway. External Coating: Hempel two coats of polyurethane on an epoxy primer (4-6 mils DFT) Internal Liner: Hempel 10-15 mil DFT epoxy liner Paint Prep: All steel surfaces sandblasted Conspicuity tape: 3M Per DOT Hose Tray: 3/16"x 27ft formed hose tray with 1/4 in. supports on both sides Fenders: Two (2) aluminum front fenders with mudflaps

29 412,65 L

1

Aluminio

Hendrickson

11 X 24.5 R, Cut and chip

Aluminio

Tres

Fijo

14,63 m

259,08 cm